Amiable Impex
Graphite Moulds
Exothermic weld Common Joints is also known in the Market with different brand names such as AURAWELD, CADWELD, ERICO, EXOWELD, KUMWELL, FURSEWELD, THERMOWELD, AIWELD.
01We offer a wide range of Graphite Moulds used for Exothermic Welding. The Graphite Molds come in various sizes based on the type of joints.
02For every different type of joint – Different Graphite Moulds are used. Based on the joint – the Exothermic Weld powder quantity is decided and accordingly the Graphite Mold is designed for Exothermic Weld.
TEE / T Joint
In Exothermic Welding TEE /T joint or Straight joint are the most common joints. Our Graphite Mold TEE / T Joint Design for Exothermic Welding is very superior and is being designed by our Professional personnel taking care minutely for all technical parameters. Graphite Mold used is not standard graphite.
From our Graphite Mold TEE/T Joint design for Exothermic Welding – A Person can do a minimum of 50 Joints. However, it can also go to more than 150 Joint but we recommend 50 Joint in order to get a good result.
The mold is made of a quality graphite body to obtain the perfect seal and lasting performance. The Graphite Mold used by our company for Exothermic Weld Common Joints is made of High Quality and we check all the technical parameters before its used in Manufacturing Process.
After the Graphite Mold is designed, we practically check the Joint, and after it passes all our stringent checks only then the Graphite Mold is being supplied to our customers for Exothermic Welding.
Joint Catalogue
Straight
TEE Joint / T Joint
X – Joint
Horizontal Joint
TEE Joint / T Joint
X – Joint
Cable Tap To Bar – TEE / T Joint
Cable Run To Bar – TEE / T Joint
Cable To Surface (Steel / Copper)
Cable Run To Surface (Steel / Copper)
Straight Joint
TEE Joint / T Joint
Full Cross Joint
Half Cross Joint
Bar To Ground Rod
Bar Run To Ground Rod
Start a conversation
Contact Amiable Impex for Exothermic Welding Powder, Graphite Moulds and complete welding kit requirements.